Page 82 - E & S Wood Creations Catalog

Cleaning & Care
Routine Cleaning and Care
DUST CAREFULLY with a soft cloth, following the grain pattern of the wood. Use an old T-shirt or cheesecloth that has been laundered to remove the sizing.
DUST OFTEN to remove everyday abrasive particles from wood surfaces.
CONSIDER CLEANING with a mild non- alkaline soap and water. Use the suds in a damp sponge or cloth, but be sure to pre-test the solution on an out-of- sight section to make sure it doesn’t damage the finish. Dry immediately with a soft cloth and buff lightly, following the grain.
DON’T WAX or use any polish that contains any silicones! Catalyzed heat and moisture resistant finishes don’t need additional polish, but if you want to use a polish we recommend Guardsman Furniture Polish.
Care of Solid Wood Furniture
If cared for properly your solid hardwood furniture can give you a lifetime of service and beauty. Here are several care tips that will enhance your solid hardwood furniture investment:
• Place your furniture away from radiators,
fireplaces, and heating ducts.
• Position furniture out of direct sunlight or adjust blinds to
avoid hour after hour of direct sunlight.
• Control humidity to 40%–45%. In winter use a humidifier,
in summer use a dehumidifier or air conditioner. • Use padding under all sharp, hot, or cold objects. • Avoid using nail polish remover, alcohol, and
other solvents near or on furniture.
Real or Imitation?
Not sure if you’re buying solid hardwood or a chip imitation? A check point is the glue joints. Put your finger on a glue joint and trace it along the top of the surface, over the edge, and to the underside. If the line disappears its probably an imitation. Solid hardwood joints on the other hand can be traced across the top, the side and the underside.
E&S Wood Creations 99